Multiple rogue wave and solitary solutions for the generalized BK equation via Hirota bilinear and SIVP schemes arising in fluid mechanics

The multiple lump solutions method is employed for the purpose of obtaining multiple soliton solutions for the generalized Bogoyavlensky-Konopelchenko(BK) equation. The solutions obtained contain first-order, second-order, and third-order wave solutions. At the critical point,the second-order derivative and Hessian matrix for only one point is investigated, and the lump solution has one maximum value. He's semi-inverse variational principle(SIVP) is also used for the generalized BK equation. Three major cases are studied, based on two different ansatzes using the SIVP. The physical phenomena of the multiple soliton solutions thus obtained are then analyzed and demonstrated in the figures below, using a selection of suitable parameter values.This method should prove extremely useful for further studies of attractive physical phenomena in the fields of heat transfer, fluid dynamics, etc.     

Entropy of higher-dimensional charged Gauss–Bonnet black hole in de Sitter space

The fundamental equation of the thermodynamic system gives the relation between the internal energy, entropy and volume of two adjacent equilibrium states. Taking a higher-dimensional charged Gauss–Bonnet black hole in de Sitter space as a thermodynamic system, the state parameters have to meet the fundamental equation of thermodynamics. We introduce the effective thermodynamic quantities to describe the black hole in de Sitter space. Considering that in the lukewarm case the temperature of the black hole horizon is equal to that of the cosmological horizon, we conjecture that the effective temperature has the same value. In this way, we can obtain the entropy formula of spacetime by solving the differential equation. We find that the total entropy contains an extra term besides the sum of the entropies of the two horizons. The corrected term of the entropy is a function of the ratio of the black hole horizon radius to the cosmological horizon radius, and is independent of the charge of the spacetime.     

大规模合成具有氧空位的多孔Bi2O3用于有效降解亚甲基蓝

光催化降解有机污染物由于其具有低能耗和绿色环保的特点，已经成为研究的热点. 氧化铋纳米晶体的带隙在2.0∽2.8 eV之间，利用它催化可见光降解有机污染物具有较高的活性，从而引起了越来越多的关注. 尽管近年来已经开发了几种制备Bi₂O₃基半导体材料的方法，但是仍然难以用简单的方法大规模地制备高活性的Bi₂O₃催化剂. 因此，开发简单可行的大规模制备Bi₂O₃纳米晶体的方法对于工业废水处理的潜在应用具有重要意义. 本文通过蚀刻商用BiSn粉末，然后进行热处理，成功地大规模制备了多孔Bi₂O₃. 获得的多孔Bi₂O₃在亚甲基蓝(MB)的光催化降解中表现出优异的活性和稳定性. 对该机理的进一步研究表明，多孔Bi₂O₃合适的能带结构允许生成活性氧物种，例如O₂^-·和·OH，可有效降解MB.     

Improved photoelectrochemical hydrogen production over decorated titania with copper and nickel oxides by optimizing the photoanode and reaction characteristics

We optimized photocatalytic hydrogen production over TiO₂-based photocatalyst by varying the dopant (nickel and copper oxide), thin film active area, nature and concentration of sacrificial agents, and light intensity in a photoelectrochemical (PEC) cell/dye-sensitized solar cell (DSSC). Various characterization techniques have been used to investigate the structural, morphological, optical, and PEC behavior of single and codoped TiO₂. The TiO₂ decorated with both Cu and Ni oxides with active area of 1 cm² in a mixture of 5 vol % glycerol and 1 M KOH under light intensity of 100 mWcm^?2 produced the maximum hydrogen of 338.4 μmol cm^?2 for 2 h. The superior photocatalyst performance of this photocatalyst is attributed to its small crystallite size and large pore size, as confirmed by X-ray diffractometer, Transmission electron microscopy (TEM), and surface area of Brunauer-Emmet-Teller (S_BET). The absorption edges of this photocatalyst had the highest red shift compared with single doped and pure TiO₂ because of more indirect transitions of the photoexcited electrons, greater charge carrier separation, and lower recombination rate. The photoanode active area of 1 cm² with better photocatalytic performance correlated with the number of defects and grain boundaries. Glycerol shifted the conduction band of the photocatalyst to more negative flat potential compared with others. Increasing the concentration of glycerol further than 5 vol% saturated the photocatalyst active sites, increased photooxidation intermediates of glycerol, and reduced the hydrogen production. The light intensity had the maximum impact on the hydrogen production and could strongly control the number of charge carriers in both the PEC cell and the DSSC.     

新组合模型在光电功率预测中的应用

为提高光伏预测要求的精准性,文章提出一种新算法将神经网络和ARMA算法改进组合,构成NEW ARMA-BP模型算法.以某30兆瓦的光伏电站采集的输出功率为输入样本,基于ARMA和BP神经网络算法在Matlab环境下依次搭建了相应的预测模型,预估光伏短期输出量.采用"误差正态检验图"判断基于两种不同算法的误差水平,依据两种单模型预测误差,运用所提出的新方法计算权值并获得新的预测值.基于Matlab的仿真结论验证了组合预测在光伏输出预测领域的适用性.     

Energy conditions of the f(T,B) gravity dark energy model with the validity of thermodynamics

In this article, the analysis of Tsallis holographic dark energy(which turns into holographic dark energy for a particular choice of positive non-additivity parameter δ) in modified f(T, B) gravity with the validity of thermodynamics and energy conditions for a homogeneous and isotropic FLRW Universe has been studied. The enlightenment of the field equation towards f(T,B)=αT~m+βB~n, made possible by the fact that the model is purely accelerating,corresponds to q=-0.54(Mamon and Das 2017 Eur. Phys.J.C 77 49). The generalized second law of thermodynamics is valid not only for the same temperature inside the horizon, but also for the apparent horizon for a change in temperature. The essential inspiration driving this article is to exhibit the applicability that the holographic dark energy achieved from standard Tsallis holographic dark energy and the components acquired from f(T, B) gravity are identical for the specific bounty of constants. The analysis of energy conditions confirms that the weak energy condition and the null energy condition are fulfilled throughout the expansion, while violation of the strong energy condition validates the accelerated expansion of the Universe.With the expansion, the model becomes a quintessence dominated model. The dominant energy condition is not observed initially when the model is filled with genuine baryonic matter,whereas it appears when the model is in the quintessence dominated era.     

ITER聚变功率关闭系统的一种阀门箱 结构的有限元分析

用ANSYS软件对ITER聚变功率关闭系统(FPSS)的一种阀门箱的结构在ITER各种典型荷载组合下的应力和应变进行了有限元分析，并遵照ASME及ITER标准对分析结果进行了评判。结果表明这种阀门箱结构能够满足ITER的设计要求。     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.     

OH+C2H3F的反应机理及产物支化比反应的理论研究

本文对HOC₂H₃F可能解离通道的势能面进行从头算CCSD(T)/CBS//B3LYP/6-311G(d，p)计算，同时对速率常数进行Rice-Ramsperger-Kassel-Marcus计算. 生成主要产物CH₂CHO+HF最有利的反应途径是OHC₂H₃F→i2→TS14→i6→TS9→i3→TS3→CH₂CHO+HF，其中速率决定步骤是HF通过TS11从CO桥接位置解离，能量比反应物高3.8 kcal/mol. 借助中间态TS14，F原子从C_α迁移到C_β位置生成CH₂O+CH₂F，然后通过中间态TS16，H从O迁移到C_α位置；通过中间态TS5，C-C键断裂生成产物，其能量比反应物低1.8 kcal/mol，比TS11低4.0 kcal/mol.     

喷流冷却复合陶瓷薄片激光器的热特性仿真分析及实验研究

为分析喷流冷却复合陶瓷薄片激光器的热特性,设计用于冷却复合陶瓷薄片的喷流冷却系统.利用湍流换热理论和计算流体动力学仿真方法建立喷流冷却复合陶瓷薄片激光器的流固耦合热仿真模型,定义评价其冷却能力和冷却均匀性的定量参数.根据该仿真模型得到喷流冷却系统的最优设计参数,并进行实验验证.使用163孔喷板,流量为0.2kg/s,入口温度为20℃,在1200 W泵浦时获得359 W激光输出功率,并测得复合陶瓷薄片上表面的最高温度为92℃.激光输出功率与复合陶瓷薄片上表面温度均与泵浦功率呈近似正线性关系,且温度的实验值与仿真值相符度较高.